Ethernet and PoE - for 19" RACK

DL-Cat.6A-M

Order number: A04196

LPZ 1 and higher, Ethernet without PoE

fine surge protection
installation at protected device inside LPZ1 and higher (not suitable for LPZ 0)
for pprotection of Ethernet networks (up to Cat.6A) without PoE
installation into DL-PL-RACK-1U box
DL-...-M with front output
DL-...-R-M with rear output
not applicable for Ethernet with PoE

Technical parameters

Parameter name		Parameter value
Type of SPD		C2,C3
Location of SPD		ST 2+3
Mounting		DL-PL-RACK-1U
Maximum operating voltage	U_c	6.00 V AC
Maximum operating voltage	U_c	8.50 V DC
Maximum operating voltage POE	U_c	6.00 V AC
Maximum operating voltage POE	U_c	8.50 V DC
Nominal load current per core at 25 °C	I_L	0.5 A
Treshold frequency core-core	f	500.00 MHz
Insertion attenuation at treshhold frequency		2.90 dB
C2 nominal discharge current (8/20 µs) per core	I_n	0.20 kA
C2 total discharge current (8/20 µs) cores-PE	I_Total	1.60 kA
C2 voltage protection level mode (POE) at In	U_p	55.00 V
C2 voltage protection level mode core-PE at In	U_p	400 V
C2 voltage protection level mode core-core at In	U_p	55 V
C3 voltage protection level mode (POE) at 1 kV/µs		30.00 V
C3 voltage protection level mode core-PE at 1 kV/µs	U_p	600 V
C3 voltage protection level mode core-core at 1 kV/µs	U_p	30 V
Response time core-core	t_a	1 ns
Response time core-PE	t_a	100 ns
Connection (input - output)		RJ 45/RJ 45
Degree of protection		IP 20
Range of ambient temperatures (min/max)		-40 / 80 °C
Humidity		5 - 95 %
According to standard		EN 61643-21+A1,A2:2013, IEC 61643-21+A1,A2:2012
Customs tariff number		85363010
EAN		8595090541967